Premium industrial valves supplier factory: We are committed to producing the best quality products at the most competitive prices. Therefore, we sincerely invite all interested companies to contact us for more information. Our objective is “good quality for survival, good faith for development, using new technology to improve product quality”. Our valves are produced to the highest quality standards with modern manufacturing technology and astute materials sourcing. Most of our certificated products sell to over 36 cities in Europe, North America, South America, Africa, etc. As a full-service valve supplier, we have 18 years manufacturing experience in producing various industrial valves. Our production workshop based in China is equipped to provide a professional custom valve service. Find even more info at industrial valve manufacturer.
Float control valve is a modulating valve that accurately controls the liquid level in tanks. This valve is designed to open fully when the liquid level reaches a preset low point, and close drip-tight when the level reaches a preset high point. The float pilot is remotely installed Inside of reservoir, or Integrally installed with main valve for size less than 4 Inch. Our hydraulic float valve can stop overflow or overfilling while the valve connector connects the valve to the incoming liquid. When the float rises to a selected level, the float level control valve is then opened or closed by the lever attached to the float.
Pressure Testing: Conduct regular pressure tests on the valve to ensure it is functioning correctly and within the required pressure range. This can help identify any issues or potential problems before they become more severe. Calibration: Calibrate the valve periodically to ensure it is operating at the correct set point. Adjust the valve as necessary to maintain the required water level or pressure. Replacement of Components: Replace any worn or damaged components, such as gaskets, seals, or springs. Use only manufacturer-approved replacement parts to ensure compatibility and avoid potential problems. Regular Maintenance Schedule: Develop and follow a regular maintenance schedule for the altitude valve, including routine cleaning, lubrication, inspection, and testing.
NSCV- Non Slam Check Valve is used as protection against reverse flow when power failure in areas where noise pollution or water hammering is a critical issue. It can provide not only quiet performance but also low head loss. Features: High strength ductile iron body used for durability and less weight; Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss; One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve; Coated with powder epoxy both inside & outside for corrosion resistance; Bronze bushing reduce wearing problem during operation; Hydrodynamic design with spring ensures non slamming and water hammerless; Stainless steel spring hidden in the diffuser under protection while valve in operation; Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec; Installation can be vertical/horizontal/ inclined. For size DN800 and up preferred vertical installation. ·Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension. Read additional info on https://www.shsuotevalve.com/.
What is an Altitude Valve? An altitude valve, also known as an altitude control valve or altitude regulator, is a type of valve used in water distribution systems. It is designed to maintain a specific water level or pressure within a storage tank or elevated structure. The purpose of an altitude valve is to control the flow of water into or out of a storage tank to maintain a predetermined level or pressure. It functions by automatically opening and closing based on changes in water level or pressure. When the water level or pressure drops below the desired set point, the altitude valve opens to allow water to flow into the tank, replenishing the supply. Conversely, when the water level or pressure rises above the set point, the valve closes to prevent overfilling or excessive pressure.
A lug type butterfly valve is a versatile valve commonly used in various industrial applications for regulating or isolating the flow of fluids. It derives its name from the lugs or ears located on both sides of the valve body, which allow it to be easily installed and secured between flanges in a pipeline system. The lug style butterfly valve consists of a disc that rotates on an axis within the valve body, controlling the flow by either fully opening or closing the passage. Lug type butterfly valves are known for their compact design, lightweight construction, and ease of installation. They offer efficient flow control, excellent sealing capabilities, and low pressure drop. With their simple operation and reliable performance, lug type butterfly valves are widely used in industries such as water treatment, HVAC, chemical processing, and food and beverage.
