Best rated cylinder light provider: In terms of size, the magnetic track is mainly divided into two types: 20mm width (M20) and 35mm width (M35). The width of these two track strips determines the width of the corresponding magnetic lamp track head. That is, a 20mm wide track can only be installed with lamps with a 20mm width track head, and 35mm is also the same. Of course, recently there has been another slim type track, only with 15mm available in markets. From the installation way, the magnetic rails include a recessed magnetic track, suspended magnet track, and surface-mounted magnetic rails. Discover additional information on magnetic track light.
When choosing LED landscape lighting fixtures, it’s important not to get sucked into flashy marketing messages from companies promoting their products as “bright.” Just because lights are bright doesn’t mean that they’re great for use in your yard. In fact, it’s the opposite! Ideally, you should choose LED landscape lights that are subtle and not too eye-catching. Although these types of lights aren’t as cheap (they’re typically more expensive than other options, like solar panels).
Wattage is a measure of the energy consumption of a lamp, not the amount of light it emits. For led floodlights, generally 10W to 1000Watt optional. For small places, it is enough for 10W-50Watt, they are suitable for installation at a height of 3-5 meters. Then the higher wattage is better choices for higher place. The beam angle of the led flood lights are wide or narrow, and the range is between 3°～140°. Different application places have different requirements for the luminous angle. For some trees, landscapes or building outlines, it is more suitable to choose a narrow beam angle led floodlights, which can play a key part of the lighting effect, highlighting the characteristics of the illuminated object. However, for large spaces, then the wide distribution floodlights will be much better, such as 120° or 70*140°.
High lumens. most of them are about 100lm/W output. Even it can be up to 150lm/W output for best outdoor flood lights in markets, saving much more 80% energy than traditional halogen flood lights or HPS floodlights. Longer lifespan. The service life of LED reflector light is at least twice as long as that of a traditional projection lamp, which can reach 50000hrs. The outdoor led projection light produced in 2013 is still in normal operation, and its service life has exceeded 7 years. Technical Support: It is ok to support IES files to do Dialux simulation, providing installation, maintenance guidance, or technical training and lighting design solutions.
GRNLED (Golumen) is the best magnetic track lighting manufacturer, factory, and supplier in china since 2018, with ISO9001:2015, providing high-quality magnet track light with Osram, Philips chips, and 2.4G TUYA WIFI, BLUETOOTH, ZIGBEE smart magnetic track lighting system with low voltage DC48V or 110V/220-240VAC input voltage at a competitive price. Our magnetic linear track lights have been CE RoHS approved. It is ok to do ETL, UL, CSA, SAA, and CB magnetic track lights if needed.
DOB Led flood lights: “DOB” is the abbreviation of “Driver on board”, which means that the power supply is on the board. The so-called DOB led floodlights means that the AC power supply and led chips are integrated on the PCB at the same time. It is also called driverless AC LED flood lights. The cost of this luminaries is the lowest, but in terms of quality, it is not as good as floodlights with constant current drive. Moreover, the input voltage of most DOB Flood lights can only be 220-240VAC, and the power factor is generally only about 0.5-0.6. Africa, Middle East, Southeast Asia, South Asia, South America non-developed markets. This kind of lamps is not suitable for commercial and industrial projects and places with strict quality requirements.
Durability: Make sure the lights are made of durable materials that can withstand the elements. Warranty: Make sure the lights come with a good warranty in case of any defects. a good solar street light manufacturer or supplier will provide 3years warranty at least. Which sensor is used in solar street light? A light-dependent resistor (LDR) is typically used in solar street lights to detect the presence of light. The LDR is used to detect the amount of light present and to turn the street light on or off accordingly.
We are the best industrial Led Floodlight manufacturer, factory, and supplier in China. The following floodlight types’ light sources can be both SMD and COB-led chips. They are all at competitive prices and have stable quality. Most of them are with a high-quality constant current isolated driver, PF>0.9, surge protection up to 2KV-6KV, 2/3/5Years warranty. The materials adopt an aluminum heat body and toughed glass cover, Protection grade up to IP65 and IK08. Widely used as industrial lighting for construction sites, factories, and tunnels, or as outdoor landscape lighting for external walls, tree lighting.
Safety: Solar-powered street lights provide a safe and secure environment for pedestrians and drivers. What is the voltage of solar street light? The voltage of solar street lights can vary depending on the type of light and the size of the solar panel. Generally, the voltage of a solar street lamp is between 6V and 24V, the main one is a 3.2V system and a 12.8V system for solar-powered street lights with LiFoPo4 battery, and an 11.1V system for Li-battery.
Third, the temperature of the LED flood light is too high. Generally, this kind of light appears in the LED flood light fixtures with built-in power supply. If the driver has an over-temperature protection function, and the material heat dissipation performance of the lamp cannot meet the requirements, the driver over-temperature protection will start to work and there will be flicker, for example, 20W floodlight housing is used to assemble 30W lamp, in this case, the heat dissipation will be too bad to working well. Find even more info at https://grnled.com/.
GRNLED and GOLUMEN is the best led light manufacturer in china, with ISO9001:2015 approval. And our products mostly got CE-LVD, EMC, and RoHS certificates. It is ok for us to get CB, ETL, SAA, UL, cUL, SASAO, etc if requested. OEM/ ODM available, making design freely for led lights, or color boxes. Providing IES Files for DiaLux testing. No MOQ limits for retailers, wholesalers, distributors, or engineering companies. Customization is available.
